TDS SS1200

SS1200 12" Stainless Steel Drains

Typical Applications

  • Breweries
  • Distilleries
  • Wineries
  • Salt Water Pools
  • Medical Facilities
  • Restaurant
  • Food Processing
  • Dairy Processing
  • Marine Applications

Sanitary drains designed to maximize flow capacity for commercial projects

The TDS SS 1200 Series™ is considered a 12″ wide trench drain system designed for commercial applications that require stainless steel set up. The (OD) is 16″ with the throat of the channel measuring 12.5″ wide. Sections come in lengths of 24″ and 48″ long. The material conforms to ASTM A-240 (type 304)16 gauge stainless steel. Channels for this system feature a built-in 1% slope with neutral channels available. Inlet/outlet depths range from 6.0″ to 16″ 

Grate covers for the system range from Load Class A to F including options with H-20 and/or FAA load ratings along with ADA compliance with appropriate locking devices to secure drain grates into position. End caps and catch basins are available with the SS1200. 

Custom sections and accessories are available.

SS1200 12" Stainless Steel drainage system

SS 1200 Series Fact Sheet

Channel Length: 2′ (24″), 4′ (48”)
Channel Width (OD): 16″
Channel Width (ID): 12.50″
Outlet Sizes: 4″, 6″, 8″, & 10″
Available Slope: 1%
Continuous Heat: 212°
Origin: Made in the USA

SS1200 drainage system profile image

Channel Details

Channels connect with a bolted, flanged connection between sections that will not separate during installtion.  and have a smooth v-shaped profile. End and bottom outlets are available in 2″, 3″ and 4″ diameters. Tee sections, 90° elbows, catch basins and debris strainers are also available. Bottom outlets (4″ diameter) and end outlets can be utilized on every fifth channel. To reach your full run length, select a channel with an outlet, then add channels upstream to the desired length of your total run.

          CHANNEL TYPES (See Chart)
          B = Bottom Outlet
          H = Half Channel 24″ in Length
          HB = Half Channel w/Bottom Outlet
          N = Neutral Channel (No Slope)
          NB = Neutral Channel w/Bottom Outlet 

SS1200 Channel Chart

Trench Covers

Grate covers for the system including catch basins range from Load Class A to F including options with H-20 and/or FAA load ratings along with ADA compliance with appropriate locking devices to secure drain grates into position and deter theft. 

Grate Options

Gen Foundry DD21-005 Heavy Duty Cast Iron 12″ x 24″ x 2″ Grate

SKU: DD21-005
Load Class D
System: FP1200, Trench Era
Grate Material: Ductile/Cast Iron
Grate Pattern: Slotted
Grate Height: 2 inch
Grate Width: 12 inch
Shop Now

TDS FG1241 Class C Slotted Ductile Iron 14″ x 24″ Grate

SKU: FG1241
Load Class C
System: FP1200, Trench Era
Grate Material: Ductile/Cast Iron
Grate Pattern: Slotted
Grate Height: 1 1/2 inch
Grate Width: 14 inch
Shop Now

TDS FG1242 Class E Slotted Ductile Iron 14″ x 24″ Grate

SKU: FG1242
Load Class E
System: FP1200, Trench Era
Grate Material: Ductile/Cast Iron
Grate Pattern: Slotted
Grate Height: 1 1/2 inch
Grate Width: 14 inch
Shop Now
Specification Sheets

Catch Basins
The SS1200 Series™ stainless steel catch basins to help collect sediment and debris. Standard options available as an inline catch basin measuring 14.66″ x 24″ and 24″ x 24″. However, custom sizes can be easily designed by our engineering department. Trash baskets are a solution for applications that see significant debris that needs to be collected to avoid inhibiting the flow of the drainage system. These removeable trash baskets are available in stainless steel or corrugated HDPE. Outlet sizes and positioning are based upon your requirements.

The SS1200 Series™ catch basins and debris baskets are offered as follows:

  • SS1250 – 14.66″ x 24″
  • SS1253 – 24″ x 24″
  • DA0651TC Stainless Steel Trash Basket
  • DA0651TA HDPE Corrugated Basket

Outlet can be specified for the end, bottom, or side of catch basin.

Other sizes can be custom-ordered. 

DA0651TC 12-inch Catch Basin Basket(1)
GRATE OPTIONS FOR 24" Square Catch Basin

Accessories:

  • SS1200EC (End Cap – Solid)
  • SS1200EO–4 (End Outlet-4″ dia)
  • SS1200EO-6 (End Outlet-6″ dia)
  • SS1200EO-8 (End Outlet-8″ dia)
  • DA0633S-12 (Installation Chair)

 

  • SS1200-T (Channel Tee Configuration)
  •  SS1200-LH (Channel Corner-Left Hand)
  • SS1200-RH (Channel Corner-Right Hand)

 Locking Devices:

  • HW FGS Locking Device
  • HW FGHD Locking Device – For FG1244
  • HW FGM Locking Device – For FG1245